This section describes Dinastycoin integration process into your service with Dinastycoin e-commerce solution called Dinastycoin RPC Wallet. Dinastycoin RPC Wallet is a HTTP server which provides JSON 2.0 RPC interface for Dinastycoin payment operations and address management. Dinastycoin RPC Wallet allows you to accept incoming payments, generate an address for each user via Dinasty RPC Wallet JSON RPC API and much more. Dinasty RPC Wallet JSON RPC AP page contains detailed description of every method.To start integration process you should first download DinastyCoin RPC Wallet, you can find it here: Download DinastyCoin RPC Wallet
You may also build RPC Wallet from source code:
Generate a new wallet
To start using RPC wallet you must first generate a container. Container file is the only file that stores all data required to run your service. It contains user addresses and private keys required to operate them. Make sure to backup this file regularly.
To generate a new container you should run the following command:
$ ./walletd --container-file= --container-password= --generate-container
- is the container file name and a path to it (relative or absolute); path is optional in this argument, specifying only a container’s name will result in new file located in the same folder as RPC Wallet
- is a secret password for the new wallet file. Whichever you like;
- –generate-container option tells RPC wallet to generate container file and exit.
Note: if exists DinastyCoin RPC Wallet will show you the notification and will ask you to provide a different name.
If the operation was successful you will get a corresponding message with your new DinastyCoin address. At the same time DinastyCoin RPC Wallet will save your container on the local disk (in the same folder where DinastyCoin RPC Wallet is located) and shut down.
Start DinastyCoin RPC Wallet
There are two ways to start DinastyCoin RPC Wallet:
Start with a remote connection to the Daemon
Remote connection allows you to bind your DinastyCoin RPC Wallet to a remote DinastyCoin daemon (dinastycoind). You may establish DinastyCoin daemon on both local and remote machines and connect to. Such type of connection allows you to start DinastyCoin RPC Wallet on a relatively slow machine while heavy loaded daemon is going to work on a separate powerful server.
- For local daemons use localhost or 127.0.0.1 as an IP address.
- For remote daemons specify the remote daemon’s IP address.
Default DinastyCoin daemon ports are 8080 and 8081.Use the following command to start DinastyCoin RPC Wallet with a remote connection:
$ ./walletd --container-file= /--container-password= --daemon-address= /--daemon-port=8080
Note: DinastyCoin daemon (dinastycoind) should be running at the moment RPC wallet is starting in a remote connection mode.Note: DinastyCoin RPC Wallet will still provide some functionality even if Daemon server fails. For example, you will be able to generate addresses for your users.
Start as in-process node
You can also start DinastyCoin RPC Wallet with an in-process node. This allows you to start RPC Wallet out-of-box with no external daemon required. You will get a fully functional node for DinastyCoin network inside DinastyCoin RPC Wallet. You don’t have to download or install anything besides DinastyCoin RPC Wallet. This approach will help reduce the overheads required for infrastructure maintenance.Use the following command to start DinastyCoin RPC Wallet with an in-process node
$ ./walletd --container-file= --container-password= --local
h3>Configure DinastyCoin RPC Wallet
To configure RPC wallet you can use both command line and config file. Config file allows you to configure your settings only once and use “–config” option further. The command below launches DinastyCoin RPC Wallet with a specific config file:
$ ./walletd --config=/home/Downloads/myconfig.conf
To get help on available options run:
$ ./walletd -h
Please note, DinastyCoin RPC Wallet config file may consist only of these options:
|Option||Description||Config Example||Console Example|
|bind-address||Which address to bind DinastyCoin RPC Wallet to. Default value is 0.0.0.0||bind-address = 127.0.0.1|
|bind-port||Which port to bind DinastyCoin RPC Wallet to. Default value is 8070||bind-port = 8071||–bind-port=8071|
|daemon-address||DinastyCoin daemon (dinastycoind) address for remote daemon connection infrastructure||daemon-address = 127.0.0.1||–daemon-address=127.0.0.1|
|daemon-port||DinastyCoin daemon (dinastycoind) port for remote daemon connection infrastructure. Default Dinastycoind daemon ports are 8080 and 8081||daemon-port = 8080||–daemon-port=8080|
|container-file||Mandatory. Your container’s file name||container-file = mycontainer||–container-file=mycontainer|
|container-password||Mandatory. Your container’s password||container-password = mypassword||–container-password=mypassword|
|log-file||A name of log file that you want to use for logging. Default is walletd.log||log-file = mylog.log||–log-file=mylog.log|
|server-root||Working directory that you wish to use for DinastyCoin RPC Wallet. Default is current working directory.||server-root = /home/Downloads/RPCWallet||–server-root=/home/Downloads/RPCWallet|
|log-level||Level of logging. Default is 1.||log-level = 2||–log-level=2|
|testnet||Allows you to run DinastyCoin RPC Wallet in testnet.||testnet = no||–testnet=no|
|local||Option that allows you to start DinastyCoin RPC Wallet as an in-process node||local||–local|
Here’s an example of a config file:
$ cat rpc_wallet.conf container-file = mycontainercontainer-password = mypassworddaemon-port = 8091bind-port = 8050testnet = no
You may specify DinastyCoin config directly through console arguments. Here’s the same example as above in console:
./walletd --container-file=mycontainer --container-password=mypassword --daemon-port=8080 --bind-port=8050 --testnet=no
Note: config file’s path is relative to current working directory, not server root.
Note: options “container-file” and “container-password” should ALWAYS be set (in either command line or config file mode).
Note: “container-file” and “log-file” options are relative to “server-root”. “server-root” default is the current working directory.
Run DinastyCoin RPC Wallet
DinastyCoin RPC wallet can be started in both daemon and console modes.
- Daemon mode – DinastyCoin RPC Wallet is launched in the background, while you can continue to work with a console window.
- Console mode – DinastyCoin RPC Wallet is launched and prints log messages on the screen.
DinastyCoin RPC wallet starts in console mode by default.
Start as daemon (UNIX only)
To start RPC wallet as daemon just set “–daemon” (or short “-d”) option.
./walletd --container-file=mycontainer --container-password=mypassword --daemon
Note: it’s a common practice for daemons to set server root directory.
Server root is the directory where RPC Wallet stores all its files. All relative paths in RPC Wallet configuration are relative to the server root directory.
Start as service (Windows only)
To run RPC wallet as a service on Windows you have to do the following:
- Create a config file and place it in the same directory as your RPC wallet’s executable resides in.
- A note for Windows Users: In case the server root in config file is not specified all paths should be ABSOLUTE. If you set server root you can use relative paths (relative to your server root);
- Register your DinastyCoin RPC Wallet as a service. To do so, run the following command as an ADMINISTRATOR:
3. After you see message about successful service registration you can run it in your Services panel.
Uninstall service (Windows only)
If you want to delete RPC wallet you have to unregister windows service first (if you have registered it before). Run as an ADMINISTRATOR:
DinastyCoin RPC Wallet JSON RPC API
DinastyCoin RPC Wallet API allows you to create addresses for your users, accept and send transactions and much more.Detailed description for every DinastyCoin RPC Wallet API method can be found here: DinastyCoin RPC Wallet JSON RPC API